Maximize your drilling muscle with the field-tested D1000x900 Navigator® horizontal directional drill.

Maximize your drilling muscle with the field-tested D1000x900. Loaded with feature after feature to improve performance, reliability and durability, the D1000x900 is equipped with dominating twin Caterpillar C-27 engines, producing a maximum of 92,000 ft-lb (124,735.3 Nm) of rotational torque and 1,000,000 lb (4,448.2 kN) of thrust/pullback.

PRODUCT VIDEOS

FEATURES & BENEFITS

HIGH-TORQUE, LOW-SPEED HAGGLUNDS HYDRAULIC MOTORS
Operates efficiently with high-torque, low-speed Hagglunds hydraulic motors powering the rotary and carriage drives so you can run full torque and full rotary rpm simultaneously.
THRUST BOX BEARING-PACK ASSEMBLY
Reduces stress on the motor, because the thrust box bearing-pack assembly is designed to absorb the axial load caused by thrust and pullback.
FLOATING VISE
Helps prevent rod wrap or windup because its floating vise allows the breakout system to clamp the full rod upsets during breakout of the lower and upper joints.
HIGHER TORQUE
Muscles through difficult ground formations with higher torque than other models.

SPECIFICATIONS

Compare Models
Units:
  • Length (Minimum Transport)
    15.4 m
  • Width
    2.6 m
  • Height (Minimum Transport)
    3.5 m
  • Weight
    45812.8 kg
  • Suspension
    Triple axle with air ride suspension
  • Front Base Anchor Length
    6.1 m
  • Front Base Anchor Width
    1.8 m
  • Front Base Anchor Height
    61 cm
  • Front Flat Anchor Length
    2.9 m
  • Front Flat Anchor Width
    1.5 m
  • Front Flat Anchor Height
    20.3 cm
  • Rear Base Anchor Length
    4.9 m
  • Rear Base Anchor Width
    2.4 m
  • Rear Base Anchor Height
    20.3 cm
  • Number of Rear Legs
    2
  • Drill Rack Angle
    8 degrees to 12 degrees
  • Length
    3.1 m
  • Width
    2.6 m
  • Height
    2.7 m
  • Weight
    2721.6 kg
  • Heat and Air Conditioning
    In-wall combination unit
  • Thrust
    4448.2 kN
  • Pullback
    4448.2 kN
  • Maximum Spindle Torque
    138971.6 Nm
  • Maximum Spindle Torque (Low at Maximum Engine RPM)
    138971.6 Nm
  • Maximum Spindle Speed at Maximum Engine RPM (with PS800)
    36 rpm
  • Maximum Spindle Speed at Maximum Engine RPM (with PS1200/PS1600)
    54 rpm
  • Maximum Carriage Speed at Maximum Engine RPM
    23.5 m/min
  • Number of Rotation Motors
    1
  • Number of Drive Motors
    4
  • Mud Swivel
    7.6 cm

Talk with a Vermeer expert today!

Fill the next form with your informations and in the fastest time an Vermeer representant will contact you .

Request offer