Field-tested to prove it can handle the toughest large-diameter projects.

Field-tested to prove it can handle the toughest large-diameter projects, the D500x500 Navigator® horizontal directional drill is equipped with all the features HDD operators need to get the job done. It drills through almost any ground conditions with 50,000 ft-lb (67,790.9 Nm) of rotational torque and 500,000 lb (2,224.1 kN of thrust/pullback.

REQUEST OFFER

PRODUCT VIDEO

FEATURES & BENEFITS

HIGH-TORQUE, LOW-SPEED HAGGLUNDS HYDRAULIC MOTORS
Operates efficiently with high-torque, low-speed Hagglunds hydraulic motors powering the rotary and carriage drives so you can run full torque and full rotary rpm simultaneously.
THRUST BOX BEARING-PACK ASSEMBLY
Reduces stress on the motor, because the thrust box bearing-pack assembly is designed to absorb the axial load caused by thrust and pullback.
FLOATING VISE
Helps prevent rod wrap or windup because its floating vise allows the breakout system to clamp the full rod upsets during breakout of the lower and upper joints.
HIGHER TORQUE
Muscles through difficult ground formations with higher torque than other models.

SPECIFICATIONS

Compare Models
Units:
  • Length (Minimum Transport)
    13.7 m
  • Width
    2.6 m
  • Height (Minimum Transport)
    3.5 m
  • Weight
    37194.6 kg
  • Suspension
    Dual axle with air ride suspension
  • Front Base Anchor Length
    6.1 m
  • Front Base Anchor Width
    1.8 m
  • Front Base Anchor Height
    61 cm
  • Front Flat Anchor Length
    2.9 m
  • Front Flat Anchor Width
    1.5 m
  • Front Flat Anchor Height
    20.3 cm
  • Rear Base Anchor Length
    4.9 m
  • Rear Base Anchor Width
    2.4 m
  • Rear Base Anchor Height
    20.3 cm
  • Number of Rear Legs
    2
  • Drill Rack Angle
    8 degrees to 12 degrees
  • Length
    6.8 m
  • Width
    2.4 m
  • Height
    3.1 m
  • Weight
    17236.5 kg
  • Make and Model
    (1) CAT C-27
  • Fuel Type
    Diesel
  • Fuel Capacity
    1892.7 L
  • Hydraulic Tank Capacity
    2725.5 L
  • Maximum Engine RPM
    2000 rpm
  • Gross Horsepower
    596.6 kw
  • EPA Certification Family
    Tier 2 (EU Stage II)
  • Thrust
    2224.1 kN
  • Pullback
    2224.1 kN
  • Maximum Spindle Torque
    67791 Nm
  • Maximum Spindle Torque (Low at Maximum Engine RPM)
    67791 Nm
  • Maximum Spindle Speed at Maximum Engine RPM (with PS800)
    66 rpm
  • Maximum Carriage Speed at Maximum Engine RPM
    19.5 m/min
  • Number of Rotation Motors
    1
  • Number of Drive Motors
    2
  • Mud Swivel
    7.6 cm

LITERATURE

Related Products

-

Talk with a Vermeer expert today!

Fill the next form with your informations and in the fastest time an Vermeer representant will contact you .

Request offer

    FEATURES & BENEFITS SPECIFICATIONS PRODUCT VIDEO Request offer
    Jump to...