Conceput cu duritate, compactitate si usurinta in intretinere.

TRM0000 a fost proiectat avand in vedere duritatea, compactitatea si usurinta de intretinere. Motorul final Deutz Tier 4 de 100 CP (75 kW), combinat cu un tambur de 6,1 m este ideal pentru aplicatii de sol, compost si biomasa lemnoasa.

REQUEST OFFER

PRODUCT VIDEOS

FEATURES & BENEFITS

MOTOR COMPARTIMENT PLIABIL
Compartimentul motor pliabil permite accesul la partea din spate a motorului pentru intretinere si curatare.
ACCES USOR LA PANOU
Acces usor la tambur, cu acces de la sol.
AUGER DRUM OPTION
Cu capacitatea de a tensiona ecranul in jurul tamburului, operatorii pot adauga rigiditate ecranelor.
TENSION SCREEN CAPABILITIES
Acest proiect permite utilizarea de sarma de calibru mai mic, care in cele din urma creste suprafata deschisa a ecranului pentru a ajuta la imbunatatirea productivitatii.
CHAIN SPROCKET DRIVE
Unitatea pinionului de lant mentine o conexiune de actionare pozitiva, eliminand in acelasi timp nevoia unor lanturi de a se infasura in jurul tamburului.
INTRETINERE USOARA
Construit pentru intretinere usoara cu diverse puncte de acces catre zone critice care permit operatorului sa intretina eficient masina.

SPECIFICATIONS

Compare Models
Units:
  • Weight
    19005.5 kg
  • Hitch Weight
    997.9 kg
  • Transport Length
    12.2 m
  • Transport Width
    251.5 cm
  • Transport Height
    4 m
  • Operation Length
    16.5 m
  • Operation Width
    749.3 cm
  • Operation Height
    5.1 m
  • Capacity
    approximately 175 cu yd per hour (134 cu m per hour) with 0.5" (1.3 cm) screens installed and material with moisture less than 40%
  • Make and Model
    Deutz 3.6L Tier 4F (Stage IV)
  • Number of Cylinders
    4
  • Engine Rating
    100 hp
  • Fuel Tank Capacity
    189.3 L
  • Fuel Consumption
    3 gph (11.4 Lph)
  • Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles)
    30 deg
  • Battery
    950 CCA
  • Oil Filter
    Spin-on
  • Recommended Oil
    Mobil 15W40
  • Oil Volume with Filter
    9.5 L
  • System Voltage
    12 V, 120 amp alternator
  • Air Cleaner
    Dual element
  • Radiator Fan
    Suction
  • Operation
    77.8 gpm @ 3000 psi (294.5 L/min @ 207 bar)
  • Tank capacity
    302.8 L
  • Frame Description
    Four independent hydraulic jacklegs
  • Axle/Suspension
    Leaf spring
  • Tires - Option One
    385/65 R22.5 (J)
  • Hopper Capacity
    5 cu m
  • Hopper Bottom Width
    95.3 cm
  • Apron Conveyor Speed
    0-15 ft/min
  • Apron Opening Height
    114.3 cm
  • Apron Opening Width
    95.3 cm
  • Hopper Height
    9.5' from ground level at operating incline
  • Hopper Opening
    11.7' x 5.3'
  • Apron Conveyor Length
    3.8 m
  • Apron Conveyor Belt Width
    106.7 cm
  • Apron Conveyor Rollers
    5" CEMA "D" x 17
  • Drum Operation
    0-33.1 gpm (0-125.3 L/min)
  • Drum Motor
    35.5 cu in (630 cu cm) displacement
  • Drum Diameter
    2 m
  • Drum Support Description
    8 polyurethane trunnion wheels on pivoting bogeys 8" od x 4" wide
  • Drum Length
    6 m
  • Thrust Bearing Diameter
    10.2 cm
  • Thrust Bearing Face
    5.1 cm
  • Drum Speed
    0-25 rpm
  • Drum Drive Chain
    140 extended pin/extended width
  • Drum Angle Adjustability
    0-5 degrees
  • Maximum Screen Panels
    8
  • Brush Diameter
    35.6 cm
  • Bristle Material
    Polyethylene
  • Brush Assembly Support
    Two 1.25" sealed ball bearings/brush
  • Conveyor Motor Displacement
    232.7 cu-cm
  • Fines Conveyor Length
    7.2 m
  • Fines Belt Speed
    121.9 m/min
  • Conveyor Belt Width
    91.4 cm
  • Conveyor Belt Type
    220 lb (99.8 kg), 2 ply, 2/16" x 1/16" (4.8 mm x 1.6 mm) smooth
  • Conveyor Belt Stacking Height
    10.5 ft (3.2m) (conveyor @ 25 degrees)
  • Head Pulley Type
    8" crowned
  • Head Pulley Bearing
    1.5" pillow block
  • Troughing Idler Type
    20 degrees CEMA "B" with permanently sealed bearings spaced at 40" centers
  • Self-Cleaning Tail Pulley Dimensions
    8" diameter, 38" wide, crowned wing pulley, 1.75" shaft
  • Head Pulley Takeup
    20.3 cm
  • Self-Cleaning Return Idlers
    2, 4" diameter, 1, 5" diameter, "rattle roller"
  • Fines Conveyor Frame
    Engineered structural frame
  • Overs Conveyor Length
    5.9 m
  • Maximum Variable Overs Belt Speed
    109.7 m/min
  • Conveyor Belt Size
    42 in (106.7 cm)
  • Conveyor Belt Type
    220 lb (99.8 kg), 2 ply, 2/16" x 1/16" (4.8 mm x 1.6 mm) cleated
  • Conveyor Belt Stacking Height
    9' (2.74 m) (conveyor @ 25 degrees)
  • Head Pulley Type
    8" crowned
  • Head Pulley Bearing
    1.5" pillowed block
  • Self-Cleaning Tail Pulley Dimensions
    8" diameter, 44" wide, crowned wing pulley, 1.75" shaft
  • Head Pulley Takeup
    20.3 cm
  • Self-Cleaning Return Idlers
    2, 4" diameter; 1, 5" diameter, "rattle roller"
  • Overs Conveyor Frame
    Engineered structural frame
  • Troughing Idler Type
    20 degrees CEMA "B" with permanently sealed bearings spaced at 32" centers

LITERATURE

Related Products

-

Talk with a Vermeer expert today!

Fill the next form with your informations and in the fastest time an Vermeer representant will contact you .

Request offer

    FEATURES & BENEFITS SPECIFICATIONS PRODUCT VIDEOS Request offer
    Jump to...