Deoarece operatiunea dvs. stationara este alimentata cu energie electrica, Vermeer este partenerul dvs. pentru echipamentul de care aveti nevoie.

Deoarece operatiunea dvs stationara este alimentata cu energie electrica, Vermeer este partenerul dvs. pentru echipamentul de care aveti nevoie. Masina de tocat TG7000E este alimentata de doua motoare electrice care ofera o combinatie de 1000 CP (746 kW). Cu optiunea de a configura fie un panou de pornire soft-start, fie VFD - impreuna cu caracteristicile Vermeer, cum ar fi proiectarea tamburului duplex si sistemul transportor continuu cu descarcare de sub moara, TG7000E are flexibilitatea si caracteristicile de care aveti nevoie pentru procesare productiva.

REQUEST OFFER

VIDEOCLIP PRODUS

CALITĂȚI & BENEFICII

SISTEMUL TRANSPORTOR DE DESCARCARE CONTINUA SUB MOARA
Proiectat pentru a gestiona mai multa productie, cu mai putina infundare, sistemul transportor de descarcare continua de 91,4 cm ofera viteza si capacitate optime.
CABINA DE INCARCARE OPTIONALA
O cabina de incarcare optionala cu carlig permite o functionare individuala, care poate contribui la reducerea costurilor fortei de munca si la cresterea eficientei.
SISTEMUL DE RESTRICTIONARE A OBIECTELOR ARUNCATE (TORS)
TORS-ul patentat reduce cantitatea si distanta obiectelor aruncate si are o suprafata neteda pentru un flux mai bun de material.
SISTEMUL TAMBUR DUPLEX SERIA II
Tamburul duplex Seria II brevetat ofera performante dovedite de tocare, si ciocane si varfuri reversibile care pot aproape dubla durata de viata a deisgnurilor unilaterale si simplifica intretinerea zilnica.
PANOUL DE PORNIRE AL MOTORULUI
Panoul de pornire al motorului ofera optiuni pentru a configura un sistem de control care se potriveste cel mai bine aplicatiei dvs., fie ca este vorba de un panou cu pornire soft sau VFD.
DOUA MOTORE ELECTRICE
TG7000E este alimentat de doua motoare electrice care livreaza o moara combinata, de 1000 CP (746 kW). Un motor electric de 60 CP (44,7 kW) separat alimenteaza pompa pentru circuitele hidraulice, in timp ce un motor electric de 2 CP (1,5 CP) alimenteaza ventilatorul pentru a raci sistemul hidraulic.

SPECIFICAȚII

Compară produse
Units:
  • Maximum Length - Transport
    14.8 m
  • Maximum Length - Conveyor Unfolded
    21 m
  • Maximum Width (Transport)
    3.6 m
  • Maximum Height (Transport)
    3.4 m
  • Weight - Engine Option One
    32114.3 kg
  • Front Mount Pad Weight (Operation)
    11929.5 kg
  • Rear Mount Pad Weight (Operation)
    20184.9 kg
  • Maximum Length - Transport
    14.8 m
  • Maximum Length - Conveyor Unfolded
    21 m
  • Maximum Reach of Loader
    9 m
  • Maximum Width (Transport)
    3.6 m
  • Maximum Height (Transport)
    365.8 cm
  • Maximum Height - Cab in Operating Position
    5.7 m
  • Weight - Engine Option One
    37262.6 kg
  • Front Mount Pad Weight (Operation)
    22430.1 kg
  • Rear Mount Pad Weight (Operation)
    22793 kg
  • Make and Model
    Weg W22
  • Gross Horsepower (Maximum)
    745.7 kw
  • Torque (Max)
    5981.9 Nm
  • Cooling Medium
    Air
  • Torque Limiter
    PT Tech - Continuously engaged, friction type
  • Manufacturer
    Weg W22
  • Frame
    NEMA 145T
  • Horsepower
    1.5 kw
  • Voltage
    460
  • Frequency
    60
  • Phase
    3
  • Rated Speed
    1750 rpm
  • Enclosure
    TEFC
  • Full Load Amps
    2.61
  • Locked Rotor Amps
    19.6
  • Service Factor
    1.25
  • Duty Cycle
    S1
  • NEMA Design
    B
  • Insulation Class
    F
  • Full Load Torque
    8 Nm
  • Locked Rotor (%)
    240%
  • Break Down
    300%
  • Ambient Temperature
    1352 f
  • Nominal Efficiency
    86.5 (NEMA Premium Efficiency)
  • Power Factor
    0.84
  • Approximate Weight
    23.1 kg
  • Added Items
    Terminal Block, NEMA C-Face Mount
  • Drive Type
    Direct
  • Manufacturer
    Weg W22
  • Frame
    NEMA 364/5T
  • Horsepower
    55.9 kw
  • Voltage
    460
  • Frequency
    60
  • Phase
    3
  • Rated Speed
    1775 rpm
  • Enclosure
    TEFC
  • Full Load Amps
    84.1
  • Locked Rotor Amps
    538
  • Service Factor
    1.25
  • Duty Cycle
    S1
  • NEMA Design
    B
  • Insulation Class
    F
  • Full Load Torque
    296.9 Nm
  • Locked Rotor (%)
    240%
  • Break Down
    260%
  • Ambient Temperature
    1352 f
  • Nominal Efficiency
    95.4 (NEMA Premium Efficiency)
  • Power Factor
    0.86
  • Approximate Weight
    416.9 kg
  • Added Items
    Terminal Block, NEMA C-Face Mount
  • Drive Type
    Direct
  • Manufacturer
    Weg W22
  • Frame
    NEMA 404/5T
  • Horsepower
    74.6 kw
  • Voltage
    460
  • Frequency
    60
  • Phase
    3
  • Rated Speed
    1775 rpm
  • Enclosure
    TEFC
  • Full Load Amps
    111
  • Locked Rotor Amps
    810
  • Service Factor
    1.25
  • Duty Cycle
    S1
  • NEMA Design
    B
  • Insulation Class
    F
  • Full Load Torque
    395.9 Nm
  • Locked Rotor (%)
    240%
  • Break Down
    260%
  • Ambient Temperature
    1352 f
  • Nominal Efficiency
    95.4 (NEMA Premium Efficiency)
  • Power Factor
    0.88
  • Approximate Weight
    517.1 kg
  • Added Items
    Terminal Block, NEMA C-Face Mount
  • Drive Type
    Direct
  • Height
    222 cm
  • Width
    401.3 c cm
  • Depth
    61.2 cm
  • Weight
    1950.4 kg
  • Tub Table Thickness
    1.3 cm
  • Tub Table Type
    T1 Steel
  • Table Tilt Degrees
    92 deg
  • Millbox Opening
    27" x 69" (68.9 cm x 175.3 cm)
  • Inside Diameter of Tub
    3 m
  • Inside Flare Diameter - At Base of Tub
    3.1 m
  • Inside Flare Diameter - At Tub Opening
    4 m
  • Depth of Tub
    1.4 m
  • Tub Capacity
    11.5 cu m
  • Wall Type
    T1 Steel
  • Loading Height
    3.5 m
  • Drive Type
    Closed loop hydraulc, continuous sprocket
  • Drive Chain
    ANSI #160 roller chain
  • Drive Tensioner
    Hydraulic
  • Drive Motor
    Hydraulic, low speed/high torque (qty 2)
  • Tub Roller Quantity
    8 carrier, 8 guide (16 total)
  • Tub Speed
    7.2 rpm
  • Tub Agitators
    4
  • Thrown Object Restraint System
    Pivoting tub cover assembly
  • Tub Cover Description
    Conical cover wit hhydraulic swing-away
  • Tub Cover Positions
    Transport and operate with hydraulic lock
  • Rotor Deflector
    Standard
  • Wear Liner Thickness
    1.3 cm
  • Wear Liner Type
    AR400
  • Falling Object Protection at Control Station
    Overhead and side protection
  • Millbox Opening
    32" x 72" (81 cm x 183 cm)
  • Drum Diameter
    57.2 cm
  • Tip Diameter
    78.7 cm
  • Drum Cutting Width
    165.9 cm
  • Drum Skin Thickness
    3.8 cm
  • Drum Speed
    1190 rpm
  • Tip Speed
    9960 rpm
  • Bearing Type
    Double row, spherical roller
  • Bearing - Inner Race Diameter
    14 cm
  • Bearing - Dynamic Capacity
    65770.9 kg
  • Number of Hammers
    10
  • Number of Cutters
    20
  • Cutter Block Types
    2 bolt retension with 7/8" (2.2 cm) UNC fasteners, 2.75" (7 cm) and 3.5" (8.9 cm) wide block options
  • Center Retention Pin Dimensions
    2" (5.1 cm)
  • Center Retention Pin Dimensions
    4
  • Screen Weight
    226.8 kg
  • Screen Dimensions
    72.4" x 35.8" x 10.3" (183.9 cm x 91 cm x 21.2 cm)
  • Screen Type
    AR400, reversible (qty 2)
  • Breaker Bar Type
    T1 steel, replaceable
  • Breaker Bar Dimensions
    2.5" x 4" x 77" (6.4 cm x 10.2 cm x 195.6 cm)
  • Number of Sides
    4 useable edges
  • Screen Area
    26851.6 sq cm
  • Distance - Screen to Millbox Wall
    54.4 cm
  • Length
    7.3 m
  • Width
    121.9 cm
  • Belt Design
    One piece, 330# with V-cleat
  • Splice
    Flexco R2 stainless steel
  • Return Roller Quantity
    6 standard and 2 vibrating roller
  • Idler Roller Diameter
    30.5 cm
  • Idler Roller Bearing
    1- 15/16", 4 bolt flange
  • Standard Drive Roller Diameter
    35.1 cm
  • Magnetic Drive Roller Diameter
    35.1 cm
  • Drive Motor
    Geroler
  • Belt Speed
    292.6 m/min
  • Load Height
    4.3 cm
  • Tank capacity
    378.5 L
  • Recommended Oil
    Hy-Power 68
  • Filtration Method
    In-tank return filters (qty 2)
  • Number of Coolers
    1
  • Components
    Conveyor with auxiliary valve
  • System Type
    Load sense, pressure compensated
  • Pump Type
    Axial piston, variable displacement
  • Pump Flow at Maximum RPM
    129.1 L/min
  • System relief pressure
    206.8 bar
  • System Type
    Closed loop
  • Pump Type
    Axial piston, variable displacement
  • Pump Flow at Maximum RPM
    129.1 L/min
  • System relief pressure
    206.8 bar
  • Motor Series
    Heavy-duty, high torque (qty 2)
  • System Type
    Load sense, pressure compensated
  • Pump Type
    Axial piston, variable displacement
  • Pump Flow at Maximum RPM
    198 L/min
  • System relief pressure
    241.3 bar
  • System Voltage
    24 VDC
  • System Protection
    Fused
  • Display Type
    LCD multifunction, analog hydraulic gauges
  • Machine Information
    Operational, diagnostic, and system parameters
  • Operational Faults
    SAE J1939 diagnostic codes
  • Gauges
    Auxiliary hydraulic system pressure, tub rotation hydraulic system pressure, conveyor hydraulic system pressure
  • Switches
    Moisture proof, toggle switch
  • Display Type
    LCD multifunction
  • Motor Information
    Yes
  • Machine Information
    Yes
  • Operational Faults
    Yes
  • Switches
    Sealed membrane
  • Operating Range
    300' (91.4 m)
  • Battery Type
    AA (qty 6)
  • Channel Setting
    50 channels
  • Display Type
    LCD multifunction
  • Engine Information
    Yes
  • Motor Information
    Yes
  • Machine Information
    Yes
  • Operational Faults
    Yes
  • Gauges
    Loader hydraulic pressure
  • Switches
    Moisture proof, toggle style
  • Frame Description
    Continuous I-beam
  • Loader Reach
    9 M
  • Pedestal/Cab Rotation
    370 deg
  • Loader Lift Capacity at Full Reach
    1814.4 kg
  • Loader Lift Capacity at 10 ' (3.05 m)
    5443.1 kg
  • Grapple Type
    Multiple Tine, Continuous 360 Degree Rotation
  • Grapple Weight
    658.2 KG
  • Loader Controls
    Pilot operated
  • Climate Controls
    A/C and heat
  • Radio
    AM/FM, CD and 2.4" (6.1 cm) speakers
  • Window Type
    3/8" (.95 cm) polycarbonate
  • Front Intrusion Guard
    5/8" (1.6 cm) diameter reinforced wire mesh
  • Air Compressor Brand
    Mi-T-M
  • Engine
    7.5 hp (5.6 kW)
  • Maximum Pressure
    12.1 bar
  • Maximum Air Flow
    .7 cm
  • Tank capacity
    113.6 L
  • Screens
    Optional
  • Special Tools Group
    Optional
  • Special Paint
    Optional
  • Extended Warranty
    Optional
  • Preventative Maintenance
    Optional

Produse asemănătoare

-

Contactați un expert Veerem!

Completează formularul cu datele tale și în cel mai scurt timp un reprezentant Vermeer vă va contacta .

Cereți ofertă

    CALITĂȚI & BENEFICII SPECIFICAȚII VIDEOCLIP PRODUS Cereți ofertă
    Derulați la...