TR521 este proiectat pentru a separa o mare varietate de materiale precum compost, sol, nisipuri, pietris, agregat usor si namol.

TR521 este proiectat pentru a separa o mare varietate de materiale precum compost, sol, nisipuri, pietris, agregat usor si namol.

REQUEST OFFER

PRODUCT VIDEOS

CALITĂȚI & BENEFICII

TALL, WIDE THROAT OPENING
Miscati / mutati materialul fara probleme, fara a face legatura aditionala intre masina si spatiul de depozitare, datorita unei deschideri inalte si a gatului larg.
HEAVY-DUTY ROLLERS
Mentineti greutatea atunci cand prelucrati materiale umede prin fixarea pe un fir cu ecran de tensiune cu un diametru mai mic si cresterea zonei de screening.
INCREASING SCREENING AREA
Mentineti greutatea atunci cand prelucrati materiale umede prin fixarea pe un fir cu ecran de tensiune cu un diametru mai mic si cresterea zonei de screening.
REDUCED SPILLAGE
Accelerati curatarea, deoarece intermitentul si folia se potrivesc strans impotriva tamburului si a transportoarelor pentru a reduce deversarea.
CONTROALE AVANSATE
Operatorii pot controla aparatul fie prin afisajul Vermeer DP10 montat pe panoul de control, fie printr-o telecomanda de receptie de mana.
STAINLESS STEEL SCREEN OPTIONS
Ecranele din otel inoxidabil ofera o durabilitate crescuta si reduc cantitatea de legare a ecranului atunci cand lucrati cu materiale umede sau corozive.

SPECIFICAȚII

Compară produse
Units:
  • Weight
    18007.6 kg
  • Hitch Weight
    6078.1 kg
  • Transport Length
    14.2 m
  • Transport Width
    259.1 cm
  • Transport Height
    4 m
  • Operation Length
    26.2 m
  • Operation Width
    259.1 cm
  • Operation Height
    4.9 m
  • Capacity
    Approximately 150 cu yd (114.7 m³) per hr with .5" (1.3 cm) screens installed and material with moisture less than 40%
  • Make and Model
    Cummins QSB 3.8l Tier 4 Final
  • Number of Cylinders
    4
  • Engine Rating
    120 hp
  • Fuel Tank Capacity
    276.3 L
  • Fuel Consumption
    3.1 gph (11.7 L/hr)
  • Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles)
    30 deg
  • Battery
    950 CCA
  • Oil Filter
    Spin-on
  • Recommended Oil
    Mobil 15W40
  • System Voltage
    12 V, 134 amp alternator
  • Air Cleaner
    Dual element
  • Radiator Fan
    Suction
  • Operation
    62.9 gpm @2500 psi (238.1 L/min @ 172.4 bar)
  • Tank capacity
    594.3 L
  • Frame Description
    Four independent hydraulic jacklegs
  • Axle/Suspension
    Leaf spring
  • Capacity
    10205.8 kg
  • Tires - Option One
    235-75R 17.5 H qty 8
  • Hopper Capacity
    3.8 cu m
  • Hopper Bottom Width
    86.4 cm
  • Apron Conveyor Speed
    0-35 fpm (0-10.7 m/min)
  • Apron Opening Height
    86.4 cm
  • Apron Opening Width
    94 cm
  • Hopper Height
    9.5' (2.9 m) from ground level at operating incline
  • Hopper Opening
    13.2' x 5' (4 m x 1.5 m)
  • Apron Conveyor Length
    4.6 m
  • Apron Conveyor Belt Width
    106.7 cm
  • Apron Conveyor Rollers
    6" (10.2 cm) diameter qty. 13
  • Drum Operation
    0-33.1 gpm (0-125.3 L/min)
  • Drum Motor
    48.8 cu in (800 cu cm) displacement
  • Drum Diameter
    1.5 m
  • Drum Support Description
    Four steel trunnion rollers 8 in (20.3 cm) diameter 4 in (10.2 cm) width
  • Drum Length
    6.4 m
  • Thrust Bearing Diameter
    12.7 cm
  • Thrust Bearing Face
    7.4 cm
  • Drum Speed
    0-24 rpm
  • Drum Drive Chain
    120 WT
  • Drum Angle Adjustability
    3-5 degrees
  • Maximum Screen Panels
    6
  • Brush Diameter
    35.6 cm
  • Bristle Material
    Polyethylene
  • Brush Assembly Support
    Two 1.25" (3.2 cm) sealed ball bearings
  • Conveyor Motor Displacement
    463.8 cu-cm
  • Fines Conveyor Length
    19.8 m
  • Fines Belt Speed
    157 m/min
  • Conveyor Belt Width
    91.4 cm
  • Conveyor Belt Type
    220 lb (99.8 kg), 2 ply, 2/16" x 1/16" (4.8 mm x 1.6 mm)
  • Conveyor Belt Stacking Height
    14.5' with drum at 4 degree
  • Head Pulley Type
    Rubber lagged, 12" (30.5 cm) diameter, 38" (996.5 cm) wide
  • Head Pulley Bearing
    2.5" (6.4 cm) pillow block
  • Rubber Flashing
    Adjustable, .25" (.64 cm) thick, 4" (10.16 cm)
  • Troughing Idler Type
    20 degrees CEMA "B" with permanently sealed bearings spaced at 24" (60.96 cm) centers
  • Self-Cleaning Tail Pulley Dimensions
    10" (25.4 cm) diameter, 38" (96.5 cm) wide with 2.4" (6.1 cm) shaft
  • Tail Pulley Takeup
    30.5 cm
  • Self-Cleaning Return Idlers
    7, each 4" (10.2 cm) diameter
  • Fines Conveyor Frame
    4" x 8" (10.2 cm x 20.3 cm) structural steel tubing
  • Overs Conveyor Length
    6.1 m
  • Maximum Variable Overs Belt Speed
    88.4 m/min
  • Conveyor Belt Size
    36" (91.4 cm) wide with raised crescent
  • Conveyor Belt Type
    220 lb (99.8 kg), 2 ply, 2/16" x 1/16" (4.8 mm x 1.6 mm)
  • Conveyor Belt Stacking Height
    3' (.9 m) x 10' (3.1 m)
  • Head Pulley Type
    Rubber lagged, 12" (30.5 cm) diameter, 38" (996.5 cm) wide
  • Head Pulley Bearing
    2.5" (6.4 cm) pillow block
  • Self-Cleaning Tail Pulley Dimensions
    10" (25.4 cm) diameter, 38" (96.5 cm) wide with 2.4" (6.1 cm) shaft
  • Tail Pulley Takeup
    30.5 cm
  • Solid Return Idler Size
    4" (10.2 cm) diameter
  • Overs Conveyor Frame
    2.3" x 8" (5.7 cm x 20.3 cm) structural steel channel tubing

Produse asemănătoare

-

Contactați un expert Veerem!

Completează formularul cu datele tale și în cel mai scurt timp un reprezentant Vermeer vă va contacta .

Cereți ofertă

    CALITĂȚI & BENEFICII SPECIFICAȚII PRODUCT VIDEOS Cereți ofertă
    Derulați la...