Putere de lucru puternica, realizand o scurta lucrare de procesare a materialului.

Cu un tambur de 1,83 m si o cabina care detine 4,6 metri cubi, TR626 face rapid orice lucrare a materialului de prelucrare. Accesati tamburul prin panourile laterale detasabile, capatul tamburului sau partea superioara a tamburului. Cei 125 CP / 93,2 kw John Deere 4045 Tier 4 Final sunt un punct de lucru puternic. Transportor impresionant de 22,1 m, care este dotat cu scripete de autocuratare si cu rotile de retur.

REQUEST OFFER

PRODUCT VIDEOS

CALITĂȚI & BENEFICII

STARTUP DELAY AND ALARM SYSTEMS
Imbunatatiti siguranta lucratorului cu intarziere la pornire si sisteme de alarma care va anunta intreg echipajul atunci cand aparatul urmeaza sa porneasca.
TALL, WIDE THROAT OPENING
Manevrati materialul dorit fara probleme, fara a face legatura cu alte accesorii, datorita unei deschideri inalte si a gatului larg de care dispune TR626.
HEAVY-DUTY ROLLERS
Manevrati materialul dorit fara probleme, fara a face legatura cu alte accesorii, datorita unei deschideri inalte si a gatului larg de care dispune TR626.
KEEP SCREEN WEIGHTS LOW
Mentineti greutatea scazuta a ecranului atunci cand prelucrati materiale umede prin fixarea pe un fir cu ecran de tensiune cu un diametru mai mic si cresterea zonei de screening.
REDUCED SPILLAGE
Accelerati curatarea, deoarece intermitentul si folia se potrivesc strans impotriva tamburului si a transportoarelor pentru a reduce deversarea.
LOW HOPPER INFEED HEIGHT
Uitati de rampele de incarcare, deoarece TR626 are o inaltime mica de alimentare a buncarului.

SPECIFICAȚII

Compară produse
Units:
  • Weight
    22543.5 kg
  • Hitch Weight
    7565.9 kg
  • Transport Length
    16.6 m
  • Transport Width
    287 cm
  • Transport Height
    4.1 m
  • Operation Length
    25.7 m
  • Operation Width
    287 cm
  • Operation Height
    4.8 m
  • Capacity
    Approximately 200 cu yd (152.9 cu m) per hour with .5" (1.3 cm) screens installed and material with moisture less than 40%
  • Make and Model
    John Deere PowerTech PVX 4.5L, 4045HFC93 Tier 4F
  • Number of Cylinders
    4
  • Engine Rating
    134 hp (93.2 kW) @ 2400 rpm, 398 ft-lb (531.6 Nm) of torque @ 1600 rpm
  • Fuel Tank Capacity
    276.3 L
  • Fuel Consumption
    3.5 gph (13.3 L/hr) under most operating conditions
  • Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles)
    30 deg
  • Battery
    950 cold cranking amps
  • Oil Filter
    Spin-on
  • Recommended Oil
    Mobil 15/40
  • Oil Volume with Filter
    14.7 L
  • System Voltage
    12 V, 120 amp alternator
  • Air Cleaner
    Dual element oversized
  • Radiator Fan
    Suction-type
  • Operation
    62.9 gpm @ 2800 psi (238.1 L/min @ 172.4 bar [17240 kPa])
  • Tank capacity
    757.1 L
  • Frame Description
    4 independent hydraulic jacklegs
  • Axle/Suspension
    Leaf spring
  • Capacity
    10205.8 kg
  • Tires - Option One
    235-75R 17.5H qty. 4
  • Hopper Capacity
    4.6 cu m
  • Hopper Bottom Width
    121.9 cm
  • Apron Conveyor Speed
    0-205 fpm (0-62.5 m/min)
  • Apron Opening Height
    86.4 cm
  • Apron Opening Width
    109.2 cm
  • Hopper Height
    9.5' (2.9 m) from ground level at operating incline
  • Hopper Opening
    13.2' x 5.3' (4 m x 1.6 m)
  • Apron Conveyor Length
    4.9 m
  • Apron Conveyor Belt Width
    121.9 cm
  • Apron Conveyor Rollers
    4" (10.2 cm) diameter qty. 14
  • Drum Operation
    0-42.6 gpm (161.3 L/min)
  • Drum Motor
    48.8 cu in (800 cu cm) displacement
  • Drum Diameter
    1.8 m
  • Drum Support Description
    Four steel trunnion rollers 8 in (20.3 cm) diameter 4 in (10.2 cm) width
  • Drum Length
    7.9 m
  • Thrust Bearing Diameter
    12.7 cm
  • Thrust Bearing Face
    7.4 cm
  • Drum Speed
    0-21.6 rpm
  • Drum Drive Chain
    140 WT
  • Drum Angle Adjustability
    3-5 degrees
  • Maximum Screen Panels
    8
  • Brush Diameter
    35.6 cm
  • Bristle Material
    Polyethylene
  • Brush Assembly Support
    Two 1.25" (3.2 cm) sealed ball bearings
  • Conveyor Operation
    58.3 L/min
  • Conveyor Motor Displacement
    535.9 cu-cm
  • Fines Conveyor Length
    22.1 m
  • Fines Belt Speed
    123.4 m/min
  • Conveyor Belt Width
    91.4 cm
  • Conveyor Belt Type
    220 lb (99.8 kg), 2 ply, 2/16" x 1/16" (4.8 mm x 1.6 mm)
  • Conveyor Belt Stacking Height
    16.6' (5.1 m) with drum at 4 degrees
  • Head Pulley Type
    Rubber lagged, 12" (30.5 cm) diameter, 38" (996.5 cm) wide
  • Head Pulley Bearing
    2.5" (6.4 cm) pillow block
  • Rubber Flashing
    Adjustable, .25" (.64 cm) thick, 4" (10.16 cm)
  • Troughing Idler Type
    20 degrees CEMA "B" with permanently sealed bearings spaced at 24" (60.96 cm) centers
  • Self-Cleaning Tail Pulley Dimensions
    10" (25.4 cm) diameter, 38" (96.5 cm) wide with 2.4" (6.1 cm) shaft
  • Tail Pulley Takeup
    30.5 cm
  • Self-Cleaning Return Idlers
    11, each 4" (10.2 cm) diameter
  • Fines Conveyor Frame
    4" x 8" (10.2 cm x 20.3 cm) structural steel tubing
  • Overs Conveyor Length
    5.8 m
  • Maximum Variable Overs Belt Speed
    88.4 m/min
  • Conveyor Belt Size
    48" (121.9 cm) wide with raised crescent
  • Conveyor Belt Type
    220 lb (99.8 kg), 2 ply, 2/16" x 1/16" (4.8 mm x 1.6 mm)
  • Conveyor Belt Stacking Height
    3' (.9 m) x 10' (3.1 m)
  • Head Pulley Type
    Rubber lagged, 12" (30.5 cm) diameter, 38" (996.5 cm) wide
  • Head Pulley Bearing
    2.5" (6.4 cm) pillow block
  • Self-Cleaning Tail Pulley Dimensions
    10" (25.4 cm) diameter, 51" (129.5 cm) wide with 2.4" (6.1 cm) shaft
  • Tail Pulley Takeup
    30.5 cm
  • Solid Return Idler Size
    4" x 8" diameter
  • Overs Conveyor Frame
    4" x 8" (10.2 cm x 20.3 cm) structural steel tubing

Produse asemănătoare

-

Contactați un expert Veerem!

Completează formularul cu datele tale și în cel mai scurt timp un reprezentant Vermeer vă va contacta .

Cereți ofertă

    CALITĂȚI & BENEFICII SPECIFICAȚII PRODUCT VIDEOS Cereți ofertă
    Derulați la...